Understanding Logistic Regression
Pre-requisite: Linear Regression
This article discusses the basics of Logistic Regression and its implementation in Python. Logistic regression is basically a supervised classification algorithm. In a classification problem, the target variable(or output), y, can take only discrete values for a given set of features(or inputs), X.
Contrary to popular belief, logistic regression IS a regression model. The model builds a regression model to predict the probability that a given data entry belongs to the category numbered as “1”. Just like Linear regression assumes that the data follows a linear function, Logistic regression models the data using the sigmoid function.
Logistic regression becomes a classification technique only when a decision threshold is brought into the picture. The setting of the threshold value is a very important aspect of Logistic regression and is dependent on the classification problem itself.
The decision for the value of the threshold value is majorly affected by the values of precision and recall. Ideally, we want both precision and recall to be 1, but this seldom is the case.
In the case of a Precision-Recall tradeoff, we use the following arguments to decide upon the threshold:-
1. Low Precision/High Recall: In applications where we want to reduce the number of false negatives without necessarily reducing the number of false positives, we choose a decision value that has a low value of Precision or a high value of Recall. For example, in a cancer diagnosis application, we do not want any affected patient to be classified as not affected without giving much heed to if the patient is being wrongfully diagnosed with cancer. This is because the absence of cancer can be detected by further medical diseases but the presence of the disease cannot be detected in an already rejected candidate.
2. High Precision/Low Recall: In applications where we want to reduce the number of false positives without necessarily reducing the number of false negatives, we choose a decision value that has a high value of Precision or a low value of Recall. For example, if we are classifying customers whether they will react positively or negatively to a personalized advertisement, we want to be absolutely sure that the customer will react positively to the advertisement because otherwise, a negative reaction can cause a loss of potential sales from the customer.
Based on the number of categories, Logistic regression can be classified as:
- binomial: target variable can have only 2 possible types: “0” or “1” which may represent “win” vs “loss”, “pass” vs “fail”, “dead” vs “alive”, etc.
- multinomial: target variable can have 3 or more possible types which are not ordered(i.e. types have no quantitative significance) like “disease A” vs “disease B” vs “disease C”.
- ordinal: it deals with target variables with ordered categories. For example, a test score can be categorized as:“very poor”, “poor”, “good”, “very good”. Here, each category can be given a score like 0, 1, 2, 3.
First of all, we explore the simplest form of Logistic Regression, i.e Binomial Logistic Regression.
Binomial Logistic Regression
Consider an example dataset which maps the number of hours of study with the result of an exam. The result can take only two values, namely passed(1) or failed(0):
Hours(x) 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50 4.75 5.00 5.50 Pass(y) 0 0 0 0 0 0 1 0 1 0 1 0 1 0 1 1 1 1 1 1
So, we have
i.e. y is a categorical target variable that can take only two possible type: “0” or “1”.
In order to generalize our model, we assume that:
- The dataset has ‘p’ feature variables and ‘n’ observations.
- The feature matrix is represented as:
- Here, denotes the values of feature for observation.
Here, we are keeping the convention of letting = 1. (Keep reading, you will understand the logic in a few moments).
- The observation, , can be represented as:
- represents the predicted response for observation, i.e. . The formula we use for calculating is called hypothesis.
If you have gone through Linear Regression, you should recall that in Linear Regression, the hypothesis we used for prediction was:
where, are the regression coefficients.
Let regression coefficient matrix/vector, be:
Then, in a more compact form,
The reason for taking = 1 is pretty clear now.
We needed to do a matrix product, but there was no
actual multiplied to in original hypothesis formula. So, we defined = 1.
Now, if we try to apply Linear Regression to the above problem, we are likely to get continuous values using the hypothesis we discussed above. Also, it does not make sense for to take values larger than 1 or smaller than 0.
So, some modifications are made to the hypothesis for classification:
is called logistic function or the sigmoid function.
Here is a plot showing g(z):
We can infer from the above graph that:
- g(z) tends towards 1 as
- g(z) tends towards 0 as
- g(z) is always bounded between 0 and 1
So, now, we can define conditional probabilities for 2 labels(0 and 1) for observation as:
We can write it more compactly as:
Now, we define another term, likelihood of parameters as:
Likelihood is nothing but the probability of data(training examples), given a model and specific parameter values(here, ). It measures the support provided by the data for each possible value of the . We obtain it by multiplying all for given .
And for easier calculations, we take log-likelihood:
The cost function for logistic regression is proportional to the inverse of the likelihood of parameters. Hence, we can obtain an expression for cost function, J using log-likelihood equation as:
and our aim is to estimate so that cost function is minimized !!
Using Gradient descent algorithm
Firstly, we take partial derivatives of w.r.t each to derive the stochastic gradient descent rule(we present only the final derived value here):
Here, y and h(x) represents the response vector and predicted response vector(respectively). Also, is the vector representing the observation values for feature.
Now, in order to get min ,
where is called learning rate and needs to be set explicitly.
Let us see the python implementation of the above technique on a sample dataset (download it from here): 2.25
Estimated regression coefficients: [[ 1.70474504 15.04062212 -20.47216021]] No. of iterations: 2612 Correctly predicted labels: 100
Note: Gradient descent is one of the many ways to estimate .
Basically, these are more advanced algorithms that can be easily run in Python once you have defined your cost function and your gradients. These algorithms are:
- BFGS(Broyden–Fletcher–Goldfarb–Shanno algorithm)
- L-BFGS(Like BFGS but uses limited memory)
- Conjugate Gradient
Advantages/disadvantages of using any one of these algorithms over Gradient descent:
- Don’t need to pick learning rate
- Often run faster (not always the case)
- Can numerically approximate gradient for you (doesn’t always work out well)
- More complex
- More of a black box unless you learn the specifics
Multinomial Logistic Regression
In Multinomial Logistic Regression, the output variable can have more than two possible discrete outputs. Consider the Digit Dataset. Here, the output variable is the digit value which can take values out of (0, 12, 3, 4, 5, 6, 7, 8, 9).
Given below is the implementation of Multinomial Logistic Regression using scikit-learn to make predictions on digit datasets.
Logistic Regression model accuracy(in %): 95.6884561892
At last, here are some points about Logistic regression to ponder upon:
- Does NOT assume a linear relationship between the dependent variable and the independent variables, but it does assume a linear relationship between the logit of the explanatory variables and the response.
- Independent variables can be even the power terms or some other nonlinear transformations of the original independent variables.
- The dependent variable does NOT need to be normally distributed, but it typically assumes a distribution from an exponential family (e.g. binomial, Poisson, multinomial, normal,…); binary logistic regression assumes binomial distribution of the response.
- The homogeneity of variance does NOT need to be satisfied.
- Errors need to be independent but NOT normally distributed.
- It uses maximum likelihood estimation (MLE) rather than ordinary least squares (OLS) to estimate the parameters and thus relies on large-sample approximations.
This article is contributed by Nikhil Kumar. If you like GeeksforGeeks and would like to contribute, you can also write an article using write.geeksforgeeks.org or mail your article to email@example.com. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above.