Semaphore in Java
A semaphore controls access to a shared resource through the use of a counter. If the counter is greater than zero, then access is allowed. If it is zero, then access is denied. What the counter is counting are permits that allow access to the shared resource. Thus, to access the resource, a thread must be granted a permit from the semaphore.
Working of semaphore
In general, to use a semaphore, the thread that wants access to the shared resource tries to acquire a permit.
- If the semaphore’s count is greater than zero, then the thread acquires a permit, which causes the semaphore’s count to be decremented.
- Otherwise, the thread will be blocked until a permit can be acquired.
- When the thread no longer needs an access to the shared resource, it releases the permit, which causes the semaphore’s count to be incremented.
- If there is another thread waiting for a permit, then that thread will acquire a permit at that time.
Java provide Semaphore class in java.util.concurrent package that implements this mechanism, so you don’t have to implement your own semaphores.
Constructors in Semaphore class : There are two constructors in Semaphore class.
Semaphore(int num) Semaphore(int num, boolean how)
Here, num specifies the initial permit count. Thus, it specifies the number of threads that can access a shared resource at any one time. If it is one, then only one thread can access the resource at any one time. By default, all waiting threads are granted a permit in an undefined order. By setting how to true, you can ensure that waiting threads are granted a permit in the order in which they requested access.
Using Semaphores as Locks(preventing race condition)
We can use a semaphore to lock access to a resource, each thread that wants to use that resource must first call acquire( ) before accessing the resource to acquire the lock. When the thread is done with the resource, it must call release( ) to release lock. Here is an example that demonstrate this:
Starting A Starting B A is waiting for a permit. B is waiting for a permit. A gets a permit. A: 1 A: 2 A: 3 A: 4 A: 5 A releases the permit. B gets a permit. B: 4 B: 3 B: 2 B: 1 B: 0 B releases the permit. count: 0
Note : The output can be different in different executions of above program, but final value of count variable will always remain 0.
Explanation of above program :
- The program uses a semaphore to control access to the count variable, which is a static variable within the Shared class. Shared.count is incremented five times by thread A and decremented five times by thread B.To prevent these two threads from accessing Shared.count at the same time, access is allowed only after a permit is acquired from the controlling semaphore. After access is complete, the permit is released. In this way, only one thread at a time will access Shared.count, as the output shows.
- Notice the call to sleep( ) within run( ) method inside MyThread class. It is used to “prove” that accesses to Shared.count are synchronized by the semaphore. In run( ), the call to sleep( ) causes the invoking thread to pause between each access to Shared.count. This would normally enable the second thread to run. However, because of the semaphore, the second thread must wait until the first has released the permit, which happens only after all accesses by the first thread are complete. Thus, Shared.count is first incremented five times by thread A and then decremented five times by thread B. The increments and decrements are not intermixed at assembly code.
- Without the use of the semaphore, accesses to Shared.count by both threads would have occurred simultaneously, and the increments and decrements would be intermixed.To confirm this, try commenting out the calls to acquire( ) and release( ). When you run the program, you will see that access to Shared.count is no longer synchronized, thus you will not always get count value 0.
This article is contributed by Gaurav Miglani. If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to firstname.lastname@example.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above.