Skip to content
Related Articles
Open in App
Not now

Related Articles

Memory Hierarchy Design and its Characteristics

Improve Article
Save Article
  • Difficulty Level : Easy
  • Last Updated : 30 Jan, 2023
Improve Article
Save Article

In the Computer System Design, Memory Hierarchy is an enhancement to organize the memory such that it can minimize the access time. The Memory Hierarchy was developed based on a program behavior known as locality of references.The figure below clearly demonstrates the different levels of memory hierarchy : This Memory Hierarchy Design is divided into 2 main types:

  1. External Memory or Secondary Memory – Comprising of Magnetic Disk, Optical Disk, Magnetic Tape i.e. peripheral storage devices which are accessible by the processor via I/O Module.
  2. Internal Memory or Primary Memory – Comprising of Main Memory, Cache Memory & CPU registers. This is directly accessible by the processor.

We can infer the following characteristics of Memory Hierarchy Design from above figure:

  1. Capacity: It is the global volume of information the memory can store. As we move from top to bottom in the Hierarchy, the capacity increases.
  2. Access Time: It is the time interval between the read/write request and the availability of the data. As we move from top to bottom in the Hierarchy, the access time increases.
  3. Performance: Earlier when the computer system was designed without Memory Hierarchy design, the speed gap increases between the CPU registers and Main Memory due to large difference in access time. This results in lower performance of the system and thus, enhancement was required. This enhancement was made in the form of Memory Hierarchy Design because of which the performance of the system increases. One of the most significant ways to increase system performance is minimizing how far down the memory hierarchy one has to go to manipulate data.
  4. Cost per bit: As we move from bottom to top in the Hierarchy, the cost per bit increases i.e. Internal Memory is costlier than External Memory.

                   According to the memory Hierarchy, the system supported memory standards are defined below:

     

Level 1 2 3 4
Name Register Cache Main Memory Secondary Memory
Size     <1 KB less than 16 MB         <16GB        >100 GB
Implementation Multi-ports On-chip/SRAM DRAM (capacitor memory)     Magnetic
Access Time   0.25ns to 0.5ns 0.5 to 25ns 80ns  to 250ns 50 lakh ns
Bandwidth 20000 to 1 lakh MBytes 5000 to 15000 1000 to 5000 20 to 150
Managed by Compiler Hardware Operating System  Operating System
Backing Mechanism From cache  from Main Memory from Secondary Memory from ie
My Personal Notes arrow_drop_up
Related Articles

Start Your Coding Journey Now!