# Measurement of Area, Volume and Density

When Humans look at their childhood pictures, the first thing they realize is how tall or heavy they have become as compared to the early stages of their lives. Noticing the increment in the weight or becoming taller is done through measurement. Measurement is required everywhere in order to specifically compare a quantity’s value from its original value. There can be many examples where measurement is required, For example, a thermometer is used to measure the temperature in Celsius of the body, the clocks on the wall are used to measure time in hours, and so on.

### Measurement

Calculating the value of one quantity by comparing it with the standard value of the same physical quantity is called Measurement. It can be said that measurement associates the physical quantity with its numeric value.

Normally, objects are measured by placing them next to each other, and it can be explained which one is heavier or taller, etc. Measuring an object gives two results- value and unit of the quantity. For example, The length of the scale is 15 cm long where 15 is the value and the centimeter is the unit used for length.

**Metric System**

Metric system is the system that came from the decimal system and this system is used to measure basic quantities, metric system paves the way for the conversion of units, that is, the conversion of bigger units into smaller and vice-versa is possible due to the system. The basic quantities that are present are meter, gram, and liters, and they are used to measuring quantities of length, volume/mass, and capacity.

### Measurement of Length

According to the metric system, length is calculated in meters. However, it can easily be converted into other forms depending upon the requirement, for instance, if the requirement is to measure the bigger quantity, it should be measured in kilometers, if the requirement is to measure something smaller, it should be in centimeters. Let’s say, the requirement is to measure a certain distance, it should either be in meters or kilometers.

Below is the easier way to explain the conversion,

### Measurement of Area

In the standard way, the area of any quantity is measured in meter^{2}, since the area is a two-dimensional quantity that is scalar in nature. It involves lengths going in two different directions known as length and breadth. The area of bigger and smaller quantities can be converted easily using different units, for example, if the area of a small table is to be measured, it is measured in cm^{2} and if the area of the plot is to be measured, the unit used is meter^{2}.

Below is the easier way to explain the conversion,

### Measurement of Volume

The volume of any quantity is three-dimensional in nature, that is, the length if going in three directions, unlike length or area, the volume contains capacity. The standard unit used to measure volume is meter3. The unit is converted into bigger and smaller units like decimeter3 or kilometer3 based on how big or small the quantity is, it is done by simply dividing/ multiplying by tens, hundreds, thousands, and so on.

Below is the easier way to explain the conversion,

### Measurement of Density

The density of any object is defined as the mass of that object per unit volume. Density tells how close or far away molecules are packed in a certain volume. The very famous scientist known as Archimedes discovered the concept of the Density of an object. In the metric system, Density is measured in kg/m^{3} and is represented as D or ρ. Therefore, it can be denoted as,

Note:

- Density has big significance in real life. One example to prove the same is the concept of an object floating on water, The density of any object helps in identifying whether an object can float on water or not. If the density of the object is lesser than that of water (997.7 kg/m
^{3}), it will float on water.- The SI unit of density is kg/m
^{3}, but for measurement of solids, g/cm^{3}can also be used. In order to measure the density of liquids, mostly g/ml is used.

### Sample Problems

**Question 1: Convert the following: m ^{3} to mm^{3}, liter to meter^{3}, mile^{3} to km^{3}.**

**Solution:**

The conversion of the above-mentioned quantities are as follows,

- m
^{3}to mm^{3}1 meter = 1000 millimeters

1m

^{3}= 1000 × 1000 × 1000 mm^{3}Therefore, 1m

^{3}= 1 × 10^{9}m^{3}.

- Liter to meter
^{3}It is known that 1 meter

^{3}= 1000 litersBy unitary method, 1 liters = 1/1000 m

^{3}1 liter= 1 × 10

^{-3}m^{3.}

- Mile
^{3}to km^{3}1 mile = 1.609 km

1 mile

^{3}= 1.609 × 1.609 × 1.609 km^{3}1 mile

^{3}= 4.165 km^{3}

**Question 2: What is the difference between the** **metric system and** **the** **imperial system of measurement?**

**Answer:**

Difference between metric system and imperial system,

Metric systemImperial systemKnown as International systems of units Known as British imperial system Measurement is done in Meter, gram and liter Measurement is done in feet, pound, inches Simple conversion (used by 95% of population currently) Complex conversion

**Question 3: Calculate the density of an object having a mass of 1200kg and its volume is 10m ^{3}.**

**Solution:**

Density of an object is given as,

D = 1200/10 kg/m

^{3}D = 120 kg/m

^{3}.

**Question 4: There are two large boxes filled with biscuits. The first has 10 biscuits and the second has 20 biscuit packets present in it. The box have the same volume. Explain which box will weigh more?**

**Answer:**

The concept is based on density. Density of an object is defined as mass/volume. Here, both the boxes have equal volume but the mass of the second box is more as it contain twice as many biscuits as first box. Hence, the second box will weigh more.

**Question 5: A cube is given which has a volume of 1000m ^{3}. Calculate the surface area of the cube in cm^{3}.**

**Solution:**

The surface area of a cube = 6a

^{2}where a is the length if the side of cube

Given, Volume of cube= 1000m

^{3}=a^{3}a = 10meter

Surface area (in meter

^{2}) = 6 × 10^{2}= 600meter^{2}1 meter= 100 centimeter

1 m

^{2}= 100 × 100 cm^{2}Therefore, Surface area of the cube= 600 × 10

^{4}cm^{2}.

**Question 6: The length and the breadth of a cuboid are same, but the height is twice in value. If the volume of the cuboid is 54000m ^{3}, find the length, breadth and height of the cuboid in centimeters.**

**Solution:**

Volume of a cuboid = L × B × H= 54000m

^{3}Let the length and breadth be z, then the height will be 2z

2z × z× z= 54000

2z

^{3}= 54000z

^{3}= 27000z= 30m

Length= 30m, Breadth= 30m, Height = 60m

In centimeters, Length= 30× 100= 3000cm

Breadth = 30 × 100= 3000cm

Height= 60 × 1000= 6000cm

**Question 7: A cm scale has a limit of 15 points, how long is the scale in meters?**

**Solution:**

Converting cm scale into m scale,

1 cm = 10

^{-2}m15 cm = 0.15m

Hence, a 15cm long scale has a length of 0.15m in International System of Units.

## Please

Loginto comment...