# Fitting Shelves Problem

Given length of wall w and shelves of two lengths m and n, find the number of each type of shelf to be used and the remaining empty space in the optimal solution so that the empty space is minimum. The larger of the two shelves is cheaper so it is preferred. However cost is secondary and first priority is to minimize empty space on wall.

**Examples: **

Input : w = 24 m = 3 n = 5 Output : 3 3 0 We use three units of both shelves and 0 space is left. 3 * 3 + 3 * 5 = 24 So empty space = 24 - 24 = 0 Another solution could have been 8 0 0 but since the larger shelf of length 5 is cheaper the former will be the answer. Input : w = 29 m = 3 n = 9 Output : 0 3 2 0 * 3 + 3 * 9 = 27 29 - 27 = 2 Input : w = 24 m = 4 n = 7 Output : 6 0 0 6 * 4 + 0 * 7 = 24 24 - 24 = 0

A simple and efficient approach will be to try all possible combinations of shelves that fit within the length of the wall.

To implement this approach along with the constraint that larger shelf costs less than the smaller one, starting from 0, we increase no of larger type shelves till they can be fit. For each case we calculate the empty space and finally store that value which minimizes the empty space. if empty space is same in two cases we prefer the one with more no of larger shelves.

Below is its implementation.

## C++

`// C++ program to find minimum space and units` `// of two shelves to fill a wall.` `#include <bits/stdc++.h>` `using` `namespace` `std;` `void` `minSpacePreferLarge(` `int` `wall, ` `int` `m, ` `int` `n)` `{` ` ` `// for simplicity, Assuming m is always smaller than n` ` ` `// initializing output variables` ` ` `int` `num_m = 0, num_n = 0, min_empty = wall;` ` ` `// p and q are no of shelves of length m and n` ` ` `// rem is the empty space` ` ` `int` `p = wall/m, q = 0, rem=wall%m;` ` ` `num_m=p;` ` ` `num_n=q;` ` ` `min_empty=rem;` ` ` `while` `(wall >= n) {` ` ` `// place one more shelf of length n` ` ` `q += 1;` ` ` `wall = wall - n;` ` ` `// place as many shelves of length m` ` ` `// in the remaining part` ` ` `p = wall / m;` ` ` `rem = wall % m;` ` ` `// update output variablse if curr` ` ` `// min_empty <= overall empty` ` ` `if` `(rem <= min_empty) {` ` ` `num_m = p;` ` ` `num_n = q;` ` ` `min_empty = rem;` ` ` `}` ` ` `}` ` ` `cout << num_m << ` `" "` `<< num_n << ` `" "` ` ` `<< min_empty << endl;` `}` `// Driver code` `int` `main()` `{` ` ` `int` `wall = 29, m = 3, n = 9;` ` ` `minSpacePreferLarge(wall, m, n);` ` ` `wall = 76, m = 1, n = 10;` ` ` `minSpacePreferLarge(wall, m, n);` ` ` `return` `0;` `}` |

## C

`// C program to find minimum space and units` `// of two shelves to fill a wall.` `#include <stdio.h>` `void` `minSpacePreferLarge(` `int` `wall, ` `int` `m, ` `int` `n)` `{` ` ` `// for simplicity, Assuming m is always smaller than n` ` ` `// initializing output variables` ` ` `int` `num_m = 0, num_n = 0, min_empty = wall;` ` ` `// p and q are no of shelves of length m and n` ` ` `// rem is the empty space` ` ` `int` `p = wall / m, q = 0, rem = wall % m;` ` ` `num_m = p;` ` ` `num_n = q;` ` ` `min_empty = rem;` ` ` `while` `(wall >= n) {` ` ` `// place one more shelf of length n` ` ` `q += 1;` ` ` `wall = wall - n;` ` ` `// place as many shelves of length m` ` ` `// in the remaining part` ` ` `p = wall / m;` ` ` `rem = wall % m;` ` ` `// update output variablse if curr` ` ` `// min_empty <= overall empty` ` ` `if` `(rem <= min_empty) {` ` ` `num_m = p;` ` ` `num_n = q;` ` ` `min_empty = rem;` ` ` `}` ` ` `}` ` ` `printf` `(` `"%d %d %d\n"` `, num_m, num_n, min_empty);` `}` `// Driver code` `int` `main()` `{` ` ` `int` `wall = 29, m = 3, n = 9;` ` ` `minSpacePreferLarge(wall, m, n);` ` ` `wall = 76, m = 1, n = 10;` ` ` `minSpacePreferLarge(wall, m, n);` ` ` `return` `0;` `}` `// This code is contributed by rexomkar.` |

## Java

`// Java program to count all rotation` `// divisible by 4.` `public` `class` `GFG {` ` ` `static` `void` `minSpacePreferLarge(` `int` `wall, ` `int` `m, ` `int` `n)` ` ` `{` ` ` `// For simplicity, Assuming m is always smaller than n` ` ` `// initializing output variables` ` ` `int` `num_m = ` `0` `, num_n = ` `0` `, min_empty = wall;` ` ` `// p and q are no of shelves of length m and n` ` ` `// rem is the empty space` ` ` `int` `p = wall/m, q = ` `0` `, rem=wall%m;` ` ` `num_m=p;` ` ` `num_n=q;` ` ` `min_empty=rem;` ` ` `while` `(wall >= n) {` ` ` `q += ` `1` `;` ` ` `wall = wall - n;` ` ` `// place as many shelves of length m` ` ` `// in the remaining part` ` ` `p = wall / m;` ` ` `rem = wall % m;` ` ` `// update output variablse if curr` ` ` `// min_empty <= overall empty` ` ` `if` `(rem <= min_empty) {` ` ` `num_m = p;` ` ` `num_n = q;` ` ` `min_empty = rem;` ` ` `}` ` ` `// place one more shelf of length n` ` ` `q += ` `1` `;` ` ` `wall = wall - n;` ` ` `}` ` ` `System.out.println(num_m + ` `" "` `+ num_n + ` `" "` `+ min_empty);` ` ` `}` ` ` `// Driver Code` ` ` `public` `static` `void` `main(String[] args)` ` ` `{` ` ` `int` `wall = ` `24` `, m = ` `3` `, n = ` `5` `;` ` ` `minSpacePreferLarge(wall, m, n);` ` ` `wall = ` `24` `;` ` ` `m = ` `4` `;` ` ` `n = ` `7` `;` ` ` `minSpacePreferLarge(wall, m, n);` ` ` `}` `}` `// This code is contributed by Saket Kumar` |

## Python3

`def` `minSpacePreferLarge(w, m, n):` ` ` `# initialize result variables` ` ` `num_m ` `=` `0` ` ` `num_n ` `=` `0` ` ` `rem ` `=` `w` ` ` `# p and q are no of shelves of length m & ` ` ` `# n respectively. r is the remainder uncovered` ` ` `# wall length` ` ` `p ` `=` `w` `/` `/` `m` ` ` `q ` `=` `0` ` ` `rem` `=` `w` `%` `m;` ` ` `num_m` `=` `p;` ` ` `num_n` `=` `q;` ` ` `min_empty` `=` `rem;` ` ` `while` `(w >` `=` `n):` ` ` `q ` `+` `=` `1` `;` ` ` `w` `-` `=` `n;` ` ` `p ` `=` `w ` `/` `/` `m` ` ` `r ` `=` `w ` `%` `m` ` ` `if` `(r <` `=` `rem):` ` ` `num_m ` `=` `p` ` ` `num_n ` `=` `q` ` ` `rem ` `=` `r` ` ` `q ` `+` `=` `1` ` ` `w ` `-` `=` `n` ` ` `print` `( ` `str` `(` `int` `(num_m)) ` `+` `" "` `+` `str` `(num_n) ` `+` `" "` `+` `str` `(rem))` `# Driver code` `w ` `=` `24` `m ` `=` `3` `n ` `=` `5` `minSpacePreferLarge(w, m, n)` `w ` `=` `24` `m ` `=` `4` `n ` `=` `7` `minSpacePreferLarge(w, m, n)` |

## C#

`// C# program to count all rotation` `// divisible by 4.` `using` `System;` `class` `GFG {` ` ` `static` `void` `minSpacePreferLarge(` `int` `wall, ` `int` `m, ` `int` `n)` ` ` `{` ` ` `// For simplicity, Assuming m is always smaller than n` ` ` `// initializing output variables` ` ` `int` `num_m = 0, num_n = 0, min_empty = wall;` ` ` `// p and q are no of shelves of length m and n` ` ` `// rem is the empty space` ` ` `int` `p = wall/m, q = 0, rem=wall%m;` ` ` `num_m=p;` ` ` `num_n=q;` ` ` `min_empty=rem;` ` ` `while` `(wall >= n) {` ` ` ` ` `q += 1;` ` ` `wall = wall - n;` ` ` `// place as many shelves of length m` ` ` `// in the remaining part` ` ` ` ` `p = wall / m;` ` ` `rem = wall % m;` ` ` `// update output variablse if curr` ` ` `// min_empty <= overall empty` ` ` `if` `(rem <= min_empty) {` ` ` `num_m = p;` ` ` `num_n = q;` ` ` `min_empty = rem;` ` ` `}` ` ` `// place one more shelf of length n` ` ` `q += 1;` ` ` `wall = wall - n;` ` ` `}` ` ` `Console.WriteLine(num_m + ` `" "` `+ num_n + ` `" "` `+ min_empty);` ` ` `}` ` ` `// Driver code` ` ` `static` `public` `void` `Main()` ` ` `{` ` ` `int` `wall = 24, m = 3, n = 5;` ` ` `minSpacePreferLarge(wall, m, n);` ` ` `wall = 24;` ` ` `m = 4;` ` ` `n = 7;` ` ` `minSpacePreferLarge(wall, m, n);` ` ` `}` `}` `// This code is contributed by Tushil.` |

## PHP

`<?php` `// PHP program to find minimum space and units` `// of two shelves to fill a wall.` `function` `minSpacePreferLarge(` `$wall` `, ` `$m` `, ` `$n` `)` `{` ` ` `// for simplicity, Assuming m is always smaller than n` ` ` `// initializing output variables` ` ` `$num_m` `= 0;` ` ` `$num_n` `= 0;` ` ` `$min_empty` `= ` `$wall` `;` ` ` `// p and q are no of shelves of length m and n` ` ` `// rem is the empty space` ` ` `$p` `= ` `$wall` `/` `$m` ` ` `$q` `= 0` ` ` `$rem` `=` `$wall` `%` `$m` `;` ` ` `$num_m` `=` `$p` `;` ` ` `$num_n` `=` `$q` `;` ` ` `$min_empty` `=` `$rem` `;` ` ` `while` `(` `$wall` `>= ` `$n` `) ` ` ` `{` ` ` `$q` `+= 1;` ` ` `$wall` `= ` `$wall` `- ` `$n` `;` ` ` `// place as many shelves of length m` ` ` `// in the remaining part` ` ` `$p` `= ` `$wall` `/ ` `$m` `;` ` ` `$rem` `= ` `$wall` `% ` `$m` `;` ` ` `// update output variablse if curr` ` ` `// min_empty <= overall empty` ` ` `if` `(` `$rem` `<= ` `$min_empty` `)` ` ` `{` ` ` `$num_m` `= ` `$p` `;` ` ` `$num_n` `= ` `$q` `;` ` ` `$min_empty` `= ` `$rem` `;` ` ` `}` ` ` `// place one more shelf of length n` ` ` `$q` `+= 1;` ` ` `$wall` `= ` `$wall` `- ` `$n` `;` ` ` `}` ` ` `echo` `$num_m` `, ` `" "` `, ` `$num_n` `, ` `" "` `,` ` ` `$min_empty` `,` `"\n"` `;` `}` ` ` `// Driver code` ` ` `$wall` `= 24;` ` ` `$m` `= 3;` ` ` `$n` `= 5;` ` ` `minSpacePreferLarge(` `$wall` `, ` `$m` `, ` `$n` `);` ` ` `$wall` `= 24;` ` ` `$m` `= 4;` ` ` `$n` `= 7;` ` ` `minSpacePreferLarge(` `$wall` `, ` `$m` `, ` `$n` `);` `// This code is contributed by ajit.` `?>` |

## Javascript

`<script>` ` ` `// Javascript program to count all rotation divisible by 4.` ` ` ` ` `function` `minSpacePreferLarge(wall, m, n)` ` ` `{` ` ` `// for simplicity, Assuming m is always smaller than n` ` ` `// initializing output variables` ` ` `let num_m = 0, num_n = 0, min_empty = wall;` ` ` `// p and q are no of shelves of length m and n` ` ` `// rem is the empty space` ` ` `let p = parseInt(wall/m, 10), q = 0, rem=wall%m;` ` ` `num_m=p;` ` ` `num_n=q;` ` ` `min_empty=rem;` ` ` `while` `(wall >= n) {` ` ` `// place one more shelf of length n` ` ` `q += 1;` ` ` `wall = wall - n;` ` ` `// place as many shelves of length m` ` ` `// in the remaining part` ` ` `p = parseInt(wall / m, 10);` ` ` `rem = wall % m;` ` ` `// update output variablse if curr` ` ` `// min_empty <= overall empty` ` ` `if` `(rem <= min_empty) {` ` ` `num_m = p;` ` ` `num_n = q;` ` ` `min_empty = rem;` ` ` `}` ` ` `}` ` ` `document.write(num_m + ` `" "` `+ num_n + ` `" "` `+ min_empty + ` `"</br>"` `);` ` ` `}` ` ` ` ` `let wall = 29, m = 3, n = 9;` ` ` `minSpacePreferLarge(wall, m, n);` ` ` ` ` `wall = 76, m = 1, n = 10;` ` ` `minSpacePreferLarge(wall, m, n);` `</script>` |

**Output**

0 3 2 6 7 0

**Time Complexity: O(w/max(n,m))**

**Space Complexity: O(1)**

**References**: Sumologic Internship question

This article is contributed by **Aditi Sharma**. If you like GeeksforGeeks and would like to contribute, you can also write an article using write.geeksforgeeks.org or mail your article to review-team@geeksforgeeks.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.

Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above.

## Please

Loginto comment...