File Transfer Protocol (FTP) in Application Layer
Prerequisite: Protocols in Application Layer
File Transfer Protocol(FTP) is an application layer protocol that moves files between local and remote file systems. It runs on the top of TCP, like HTTP. To transfer a file, 2 TCP connections are used by FTP in parallel: control connection and data connection.
What is control connection?
For sending control information like user identification, password, commands to change the remote directory, commands to retrieve and store files, etc., FTP makes use of control connection. The control connection is initiated on port number 21.
What is data connection?
For sending the actual file, FTP makes use of a data connection. A data connection is initiated on port number 20.
FTP sends the control information out-of-band as it uses a separate control connection. Some protocols send their request and response header lines and the data in the same TCP connection. For this reason, they are said to send their control information in-band. HTTP and SMTP are such examples.
FTP Session :
When an FTP session is started between a client and a server, the client initiates a control TCP connection with the server-side. The client sends control information over this. When the server receives this, it initiates a data connection to the client-side. Only one file can be sent over one data connection. But the control connection remains active throughout the user session. As we know HTTP is stateless i.e. it does not have to keep track of any user state. But FTP needs to maintain a state about its user throughout the session.
Data Structures : FTP allows three types of data structures :
- File Structure – In file-structure there is no internal structure and the file is considered to be a continuous sequence of data bytes.
- Record Structure – In record-structure the file is made up of sequential records.
- Page Structure – In page-structure the file is made up of independent indexed pages.
FTP Commands – Some of the FTP commands are :
USER – This command sends the user identification to the server.
PASS – This command sends the user password to the server.
CWD – This command allows the user to work with a different directory or dataset for file storage or retrieval without altering his login or accounting information.
RMD – This command causes the directory specified in the path-name to be removed as a directory.
MKD – This command causes the directory specified in the pathname to be created as a directory.
PWD – This command causes the name of the current working directory to be returned in the reply.
RETR – This command causes the remote host to initiate a data connection and to send the requested file over the data connection.
STOR – This command causes to store of a file into the current directory of the remote host.
LIST – Sends a request to display the list of all the files present in the directory.
ABOR – This command tells the server to abort the previous FTP service command and any associated transfer of data.
QUIT – This command terminates a USER and if file transfer is not in progress, the server closes the control connection.
FTP Replies – Some of the FTP replies are :
200 Command okay.
530 Not logged in.
331 User name okay, need a password.
225 Data connection open; no transfer in progress.
221 Service closing control connection.
551 Requested action aborted: page type unknown.
502 Command not implemented.
503 Bad sequence of commands.
504 Command not implemented for that parameter.
- It is good for simple file transfers, such as during boot time.
- It uses UDP as transport layer protocols. Errors in the transmission (lost packets, checksum errors) must be handled by the TFTP server.
- It uses only one connection through well-known port 69.
- TFTP uses a simple lock-step protocol (each data packet needs to be acknowledged). Thus the throughput is limited
Advantages of FTP(File Transfer Protocol):-
- speed is one of the advantages of FTP(File Transfer Protocol).
- File sharing also comes in the category of advantages of FTP in this between two machines file can be shared on the network.
- Efficiency is more in FTP.
Disadvantages of FTP(File Transfer Protocol):-
- file size limit is the drawback of FTP only 2 GB size files can be transferred.
- multiple receivers are not supported by the FTP.
- FTP does not encrypt the data this is one of the biggest drawbacks of FTP.
Reliable and security: FTP is both secure and unsecured we use login IDs and passwords making it secure but they can be attacked by hackers.
Anonymous FTP :
Anonymous FTP is enabled on some sites whose files are available for public access. A user can access these files without having any username or password. Instead, the username is set to anonymous and the password to the guest by default. Here, user access is very limited. For example, the user can be allowed to copy the files but not to navigate through directories.
This article is contributed by Achiv Chauhan. If you like GeeksforGeeks and would like to contribute, you can also write an article using write.geeksforgeeks.org or mail your article to firstname.lastname@example.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.
Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above.