Class 10 NCERT Solutions- Chapter 13 Surface Areas And Volumes – Exercise 13.4

Question 1. A drinking glass is in the shape of a frustum of a cone of height 14 cm. The diameters of its two circular ends are 4 cm and 2 cm. Find the capacity of the glass.

Solution:

Given values:

Height of frustum (h) = 14 cm

Radius of larger circle end (R) =  = 2 cm

Radius of smaller circle end (r)=  = 1 cm

Capacity of frustum-shaped glass = Volume of Frustum

=  πh (r² + R² + rR)

=  × π × 14 ((1 × 1) + (2 × 2) × (2 × 1))

=  × 14 × 7                     (taking π=)

= 

= 102.67 cm³

Hence, the capacity of frustum-shaped glass = 102.67 cm³

Question 2. The slant height of a frustum of a cone is 4 cm and the perimeters (circumference) of its circular ends are 18 cm and 6 cm. Find the curved surface area of the frustum.

Solution:

Slant height of frustum (l) = 4 cm

Let radius of smaller circle end = r

Let radius of larger circle end = R

Circumference of circle = 2π × (radius of circle)

Circumference of larger circle = 2πR

18 cm² = 2πR

R = 

R = cm

Circumference of smaller circle = 2πr

6 cm² = 2πr

r = 

r = cm

Now, as curve surface area of frustum = π (r+R) l

= π × () × 4                  

= 12 × 4                         (Taking π common and canceling it)

= 48cm²

Hence, the curved surface area of the frustum = 48cm²

Question 3. A fez, the cap used by the Turks, is shaped like the frustum of a cone (see Fig.). If its radius on the open side is 10 cm, radius at the upper base is 4 cm and its slant height is 15 cm, find the area of material used for making it.

Solution:

Given values:

Slant height of frustum (l)= 15 cm

Let radius of smaller circle end (r) = 4 cm

Let radius of larger circle end (R) = 10 cm

Area of material used for making it = Curve surface area + area of upper base

= (π(r+R)l) + (πr²)

= π ((r+R)l + r²)                                              (Taking π common)

= π ((4+10) × 15 + (4 × 4))

= × (226)                                         (Taking π = )

= 710.286 cm²

Hence, the area of material used for making it = 710.286 cm² 

Question 4. A container, opened from the top and made up of a metal sheet, is in the form of a frustum of a cone of height 16 cm with radii of its lower and upper ends as 8 cm and 20 cm, respectively. Find the cost of the milk which can completely fill the container, at the rate of ₹ 20 per litre. Also find the cost of metal sheet used to make the container, if it costs ₹ 8 per 100 cm². (Take π = 3.14)

Solution:

Given values:

Height of frustum (h)= 16 cm

Let radius of smaller circle end (r) = 8 cm

Let radius of larger circle end (R) = 20 cm

The amount of milk to fill the container = Volume of frustum

=  πh (r² + R² + rR)

=  × 3.14 × 16 (8×8 + 20×20 + 8×20)                (Taking π=3.14)

=  × 3.14 × 16 × (624)

= 10449.92 cm³

Cost of 1 litre milk = ₹ 20

And as, 1 m³ = 1000 cm³ = 1 litre

10449.92 cm³ = () ×10449.92 litres

cost of 10449.92 cm³ = () × 20

= ₹ 208.998

Now, metal sheet used to make the container = Curve surface area + area of lower base

= (π(r+R)l) + (πr²)                         

= π ((r+R)l + r²)                                              (Taking π common)

= π ((20+8) × (√(16²+(20-8)²)) + (8 × 8))                                (Slant height (l) = √(h²+(R-r)²))

= 3.14 × (28 × √400 + 64)                                       (Taking π = 3.14)

= 3.14 × (624)     

= 1959.36 cm²

Hence, the metal sheet used to make the container = 1959.36 cm²

As, cost of 100 cm²= ₹ 8

1959.36 cm² = (8/100) × 1959.36

= ₹156.748

Hence, the cost of the milk which can completely fill the container = ₹ 208.998

and, the cost of metal sheet used to make the container = ₹156.748

Question 5. A metallic right circular cone 20 cm high and whose vertical angle is 60° is cut into two parts at the middle of its height by a plane parallel to its base. If the frustum so obtained be drawn into a wire of diameter 1/16 cm, find the length of the wire.

Solution:

As the angle is cut into two equal parts, the height gets half too.

Let radius of smaller circle end = r

Let radius of larger circle end = R

In ∆PFR and ∆PEB

tan ∝ = 

tan 30° = 

R = 

r = 

and as height of frustum = 10 cm

So according to the question,

Frustum is converted to cylindrical wire having diameter  cm

Volume of Frustum = Volume of Cylinder

Volume of Frustum =  πh (r² + R² + rR)

= 

= 

= 

=  cm³  ………………………..(1)

Volume of Cylinder =  π(radius)²H

= π()²H …………………(2)

As (1) = (2) , then

7000π / 9 = 1/3 π(1/(16×2))²H

H =                    (cancel π from both side)

H = 796444.443 cm

H = 7964.44 m

Hence, the length of the wire = 7964.44 m