Block Cipher modes of Operation
Encryption algorithms are divided into two categories based on the input type, as a block cipher and stream cipher. Block cipher is an encryption algorithm that takes a fixed size of input say b bits and produces a ciphertext of b bits again. If the input is larger than b bits it can be divided further. For different applications and uses, there are several modes of operations for a block cipher.
Electronic Code Book (ECB) –
Electronic code book is the easiest block cipher mode of functioning. It is easier because of direct encryption of each block of input plaintext and output is in form of blocks of encrypted ciphertext. Generally, if a message is larger than b bits in size, it can be broken down into a bunch of blocks and the procedure is repeated.
Procedure of ECB is illustrated below:
Advantages of using ECB –
- Parallel encryption of blocks of bits is possible, thus it is a faster way of encryption.
- Simple way of the block cipher.
Disadvantages of using ECB –
- Prone to cryptanalysis since there is a direct relationship between plaintext and ciphertext.
Cipher Block Chaining –
Cipher block chaining or CBC is an advancement made on ECB since ECB compromises some security requirements. In CBC, the previous cipher block is given as input to the next encryption algorithm after XOR with the original plaintext block. In a nutshell here, a cipher block is produced by encrypting an XOR output of the previous cipher block and present plaintext block.
The process is illustrated here:
Advantages of CBC –
- CBC works well for input greater than b bits.
- CBC is a good authentication mechanism.
- Better resistive nature towards cryptanalysis than ECB.
Disadvantages of CBC –
- Parallel encryption is not possible since every encryption requires a previous cipher.
Cipher Feedback Mode (CFB) –
In this mode the cipher is given as feedback to the next block of encryption with some new specifications: first, an initial vector IV is used for first encryption and output bits are divided as a set of s and b-s bits.The left-hand side s bits are selected along with plaintext bits to which an XOR operation is applied. The result is given as input to a shift register having b-s bits to lhs,s bits to rhs and the process continues. The encryption and decryption process for the same is shown below, both of them use encryption algorithms.
Advantages of CFB –
- Since, there is some data loss due to the use of shift register, thus it is difficult for applying cryptanalysis.
Output Feedback Mode –
The output feedback mode follows nearly the same process as the Cipher Feedback mode except that it sends the encrypted output as feedback instead of the actual cipher which is XOR output. In this output feedback mode, all bits of the block are sent instead of sending selected s bits. The Output Feedback mode of block cipher holds great resistance towards bit transmission errors. It also decreases the dependency or relationship of the cipher on the plaintext.
Advantages of OFB –
- In the case of CFB, a single bit error in a block is propagated to all subsequent blocks. This problem is solved by OFB as it is free from bit errors in the plaintext block.
Counter Mode –
The Counter Mode or CTR is a simple counter-based block cipher implementation. Every time a counter-initiated value is encrypted and given as input to XOR with plaintext which results in ciphertext block. The CTR mode is independent of feedback use and thus can be implemented in parallel.
Its simple implementation is shown below:
Advantages of Counter –
- Since there is a different counter value for each block, the direct plaintext and ciphertext relationship is avoided. This means that the same plain text can map to different ciphertext.
- Parallel execution of encryption is possible as outputs from previous stages are not chained as in the case of CBC.